Fender Panel
Resin pad
Feature
• Very low friction coefficient
• Excellent abrasion resistance
• UV and ozone resistant
• Does not rot, split or crack
• Excellent abrasion resistance
• UV and ozone resistant
• Does not rot, split or crack
Feature
| Physical Properties | Testing Standard | Requirement |
|---|---|---|
| Density | KS MISO 1183-1 | 0.92~1.05 g/㎤ |
| Tensile Strength | KS MISO 527-1,2 | Min. 20MPa |
| Elongation | KS MISO 527-1,2 | Min. 500% |
| Compression Strength | KS MISO 604 | Min. 30MPa |
| Friction Coefficient | ASTM D 1894 | Max. 0.2 |
UHMW-PE
| Property | Test method | Unit | Requirement (virgin) | Requirement (regenerated) | Comments |
|---|---|---|---|---|---|
| Density | ISO 1183-1 | g/㎤ | 0.920-0.945 | 0.930-0.955 | |
| Tensile strength at yield | ISO 527-2 | MPa | 17-21 | Min. 17 | |
| Elongation at break | ISO 527-2 | % | Min. 150 | Min. 150 | |
| Hardness | ISO 868 | HDD | 60-65 | 60-70 | Shore D |
| Double notch Charpy Impact Strength | ISO 21304-2 | kJ/㎡ | Min. 120 | Min. 70 | Average of four samples |
| Abrasion resistance (sand slurry test) | ISO 15527 | ml/g | Max. 110 | Max. 150 | Average of min. two samples. Sample preparation: ISO 11542 |
| Friction coefficient (Static, Dry) | ISO 8295 (with Steel) | - | Min. 0.2 | Min. 0.2 |